100% satisfaction guarantee
Place your order with peace of mind.
Ultra Bond General Purpose Adhesive is specially formulated for a variety of automotive and industrial repairs. Provides a long-lasting, high strength, permanent bond that withstands harsh environments and adverse conditions. Remains highly flexible when cured and is an excellent choice for parts subject to vibration. Temperature range: -40 degrees C to 65 degrees C (-40 degrees F to 150 degrees F).
Directions: Ensure all surfaces are clan and dry. For best results. Roughen surfaces using sandpaper or other abrasive; remove all dust and residue. Use reverse side of cap to pierce tube seal. As an Adhesive: Apply a thin coat to both surfaces and wait 2 minutes before pressing parts together. Clamp or secure parts as necessary. Bond sets in 60 to 90 minutes and fully cures in 24 to 72 hours. Note: Cure time will be longer in high humidity or parts with large gaps and surfaces areas. As a Sealant: Apply a 1/4 inch layer over surfaces to be sealed. Allow to dry 24 hours. For larger gaps and surface areas apply a second coat as necessary. Paint for UV resistance.
Ultra Bond General Purpose Adhesive is specially formulated for a variety of automotive and industrial repairs. Provides a long-lasting, high strength, permanent bond that withstands harsh environments and adverse conditions. Remains highly flexible when cured and is an excellent choice for parts subject to vibration. Temperature range: -40 degrees C to 65 degrees C (-40 degrees F to 150 degrees F).
Directions: Ensure all surfaces are clan and dry. For best results. Roughen surfaces using sandpaper or other abrasive; remove all dust and residue. Use reverse side of cap to pierce tube seal. As an Adhesive: Apply a thin coat to both surfaces and wait 2 minutes before pressing parts together. Clamp or secure parts as necessary. Bond sets in 60 to 90 minutes and fully cures in 24 to 72 hours. Note: Cure time will be longer in high humidity or parts with large gaps and surfaces areas. As a Sealant: Apply a 1/4 inch layer over surfaces to be sealed. Allow to dry 24 hours. For larger gaps and surface areas apply a second coat as necessary. Paint for UV resistance.