Directions for Use (Read warnings before use): Sedan; SUV; Wagon; Crossover. Seals up to 1/4 inch punctures. No jack or tools required. 1: Make sure tire is fully deflated before use. Rotate puncture to 6 o'clock position. 2: Shake can vigorously for 30 seconds. 3: Tightly twist hose onto valve. Remove tamper evident tab. 4: Hold can upright and press yellow button down. Do not shake can while dispensing. 5: Dispense until entire can is empty and tire rim is lifted off the ground. 6: Immediately drive 3 to 6 km (Only if rim is off the ground). Note if Fix-A-Flat does not fill tire to lift rim off the ground, do not drive car and have tire repaired. Fix-A-Flat will not repair sidewall leaks, severe damage or rim leaks. If temperature is below 0 degrees C [32 degrees F], warm can using vehicle's interior heater vent before use. If a Fix-A-Flat is spilled on paint, wash off immediately with water. Advise tire repair technician of product use deflate tires containing Fix-A-Flat only in well-ventilated areas.