Get in as fast as 1 hour
Shop your favorites
Connect with shoppers
100% satisfaction guarantee
Place your order with peace of mind.
Damage-free hanging. Holds strongly. Removes cleanly. Outdoors. Negative 20 degrees F - 125 degrees F. Clips can be reused with Command Outdoor small refill strips. Limited Warranty and Limitation of Liability [for Product Sold in USA]: This product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. command.com. Clips made in Mexico. Strips made in USA.
Apply: 1. Apply to a smooth, clean and dry surface. Clean with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Remove blue liner. Press adhesive to clip. 3. Remove black liner. Press firmly to surface for 30 seconds per clip. 4. Use one clip for every 2 feet of lights. 5. Wait 1 hour before hanging lights. Remove: 1. Gently hold clip in place. 2. Never pull the strip toward you! Always pull straight down. 3 Stretch the strip slowly against the wall at least 6 inches to release.
Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply 15° to 125°F. Holds -20° to 125°F. • Not Recommended on rough surfaces, such as cement board, brick or rough-sawn wood. • Failure to follow instructions carefully may cause damage.
Damage-free hanging. Holds strongly. Removes cleanly. Outdoors. Negative 20 degrees F - 125 degrees F. Clips can be reused with Command Outdoor small refill strips. Limited Warranty and Limitation of Liability [for Product Sold in USA]: This product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. command.com. Clips made in Mexico. Strips made in USA.
Apply: 1. Apply to a smooth, clean and dry surface. Clean with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Remove blue liner. Press adhesive to clip. 3. Remove black liner. Press firmly to surface for 30 seconds per clip. 4. Use one clip for every 2 feet of lights. 5. Wait 1 hour before hanging lights. Remove: 1. Gently hold clip in place. 2. Never pull the strip toward you! Always pull straight down. 3 Stretch the strip slowly against the wall at least 6 inches to release.
Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply 15° to 125°F. Holds -20° to 125°F. • Not Recommended on rough surfaces, such as cement board, brick or rough-sawn wood. • Failure to follow instructions carefully may cause damage.